Scuze. Aceasta pagina nu a fost tradus.
Hydromatik hydraulic motor A6VE 28-160 series 63
The different sizes (NG) of the A6VE:
A6VE 28
A6VE 55
A6VE 80
A6VE 107
A6VE 140
A6VE 160
The different control devices of the Hydromatik hydraulic motor A6VE 28 - 160 at a glance:
Control, pilot-pressure related
HD1 = steuerdruckabhängig, Δp = 10 bar
HD2 = steuerdruckabhängig, Δp = 25 bar
Hydraulic two-point control
HZ1 = Size 28 + 140 – 200
HZ3 = Size 55 - 107
Electric control, proportional
EP1 = U = 12 V
EP2 = U = 24 V
Electric two-point control
EZ1 = U = 12 V for size 28 + 140 - 200
EZ2 = U = 24 V for size 28 + 140 - 200
EZ3 = U = 12 V for size 55 - 107
EZ4 = U = 24 V for size 55 - 107
Automatic control, high-pressure related
HA1 = Without pressure increase
HA2 = With pressure increase, Δp = 100 bar
HA3 = Without pressure increase
hydraulic control, speed related
DA3 = pSt / pHD = 5/100, electric travel direction valve + electric Vg max – control 24 V
Ordering code example:
A6V | E | 80 | HD1 | D | 63 | W | V | A | L | 020
Ordering code for standard program:
A6V = Axial piston unit
E = Mode of operation
80 = Size
HD1 = Control device
D = Pressure control ( only for HD, EP )
63 = Series
W = Direction of rotation
V = Seals
A = Shaft end
L = Mounting flange
020 = Ports for service lines
Hydromatik hydraulic motor A6VE - series 71
The different sizes (NG) of the Hydromatik hydraulic motor A6VE:
A6VE 60
A6VE 85
A6VE 115
A6VE 170
The different control devices of the Hydromatik hydraulic motor A6VE 60 -170 at a glance:
Proportional control hydraulic
HP1 = Positive control, ΔpST = 10 bar
HP2 = Positive control, ΔpST = 25 bar
HP5 = Negative control, ΔpST = 10 bar
HP6 = Negative control, ΔpST = 25 bar
Proportional control electric
EP1 = Positive control, U = 12 V
EP2 = Positive control, U = 24 V
EP5 = Negative control, U = 12 V
EP6 = Negative control, U = 24 V
Two-point control hydraulic
HZ5 = Negative control
HZ7 = Negative control
Two-point control electric
EZ5 = Negative control, U = 12 V
EZ6 = Negative control, U = 24 V
EZ7 = Negative control, U = 12 V
EZ8 = Negative control, U = 24 V
Automatic control high-pressure related, positive control
HA1 = with minimum pressure increase, Δp ≤ ca. 10 bar
HA2 = with pressure increase, Δp = 100 bar
HA3 = with minimum pressure increase, Δp ≤ ca. 10 bar
Ordering code example:
A6V | E | 85 | HP1 | 00 | 0 | 0 | 0 | 0 | A | 71 | M | W | V | 0 | Y2 | Z9 | 6 | B | U | Y
Ordering code for standard program:
A6V = Axial piston unit
E = Mode of operation
85 = Size
HP1 = Control device
00 = Pressure control / override
0 = Connector for solenoids
0 = Additional function 1
0 = Additional function 2
0 = Response time damping
A = Setting range for displacement
71 = Series
M = Configuration of ports and fastening threads
W = Direction of rotation
V = Seals
0 = Drive shaft bearing
Y2 = Mounting flange
Z9 = Drive shaft
6 = Port plate for service lines
B = Valves
U = Speed sensor
Y = Standard- / special version
We would be pleased to maintain your hydraulic units.
